• Achtung, achtung!  :)

    During July 27th 2024 (or 28th, depending on your time zone), hosting server maintenance is planned and the forum will not work normally (we'll set it to read-only mode at best, though it will be completely offline for a while). Hopefully, it will all go well and we will be back on line within less than 8 hours.

    Thank you in advance for your patience.

    Note, this has nothing to do with the planned forum upgrade to version 2.3, which will most probably happen at a later date (probably in Autumn).

    Relja

Looking to Frankenstein together a few components

serex711

Hub Hero
Hello, new member here (Jeff) and I have been buying/selling/repairing and riding with a passion since 2006.
I currently have a TREK SOHO with a GXP threaded BSA bottom bracket and SRAM S-300 courier crank that I wanted to upgrade to a White Industries bottom bracket I bought BBE30BSABK.

The SRAM S-300 has a 55T 130BCD single chainring. Suggestions as to what single ring cranks I can use? Spacers needed or if this is a dream I need to wake up from?

Jeff
 
Solution
Hello, new member here (Jeff) and I have been buying/selling/repairing and riding with a passion since 2006.
I currently have a TREK SOHO with a GXP threaded BSA bottom bracket and SRAM S-300 courier crank that I wanted to upgrade to a White Industries bottom bracket I bought BBE30BSABK.

The SRAM S-300 has a 55T 130BCD single chainring. Suggestions as to what single ring cranks I can use? Spacers needed or if this is a dream I need to wake up from?

Jeff

Hi Jeff and welcome, :)

As far as I can Google, the White Industries BBE30BSABK works with 30 mm spindle diameter cranks (haven't seen that BB first hand, ever :) ).

It should work with White Industries 30-series cranks...
Hello, new member here (Jeff) and I have been buying/selling/repairing and riding with a passion since 2006.
I currently have a TREK SOHO with a GXP threaded BSA bottom bracket and SRAM S-300 courier crank that I wanted to upgrade to a White Industries bottom bracket I bought BBE30BSABK.

The SRAM S-300 has a 55T 130BCD single chainring. Suggestions as to what single ring cranks I can use? Spacers needed or if this is a dream I need to wake up from?

Jeff

Hi Jeff and welcome, :)

As far as I can Google, the White Industries BBE30BSABK works with 30 mm spindle diameter cranks (haven't seen that BB first hand, ever :) ).

It should work with White Industries 30-series cranks:
https://www.whiteind.com/product-category/cranks/

I suppose it should fit other 30 mm diameter cranks, from other manufacturers.
As far as I know, it won't fit Shimano (24 mm spindle diameter - as it should be! :) ), nor SRAM (they have one end a bit narrower, for reasons beyond my comprehension, so need matching BBs - 24 DS and 22 NDS diameter, ), nor SRAM DUB (29 mm spindle diameter, too small for the 30 mm BB).

Hope this helps,
Relja
 
Solution
Hi Jeff and welcome, :)

As far as I can Google, the White Industries BBE30BSABK works with 30 mm spindle diameter cranks (haven't seen that BB first hand, ever :) ).

It should work with White Industries 30-series cranks:
https://www.whiteind.com/product-category/cranks/

I suppose it should fit other 30 mm diameter cranks, from other manufacturers.
As far as I know, it won't fit Shimano (24 mm spindle diameter - as it should be! :) ), nor SRAM (they have one end a bit narrower, for reasons beyond my comprehension, so need matching BBs - 24 DS and 22 NDS diameter, ), nor SRAM DUB (29 mm spindle diameter, too small for the 30 mm BB).

Hope this helps,
Relja
Appreciate it..
 

Adverts

Support BikeGremlin

Help BikeGremlin stay online with a Patreon donation:

Back
Top Bottom