Yes, I do spend my time and effort for stuff like this - LOL.
And yes, I'm too old to figure out how to post a PDF on Reddit.
So, here are my calculations for these hub dimensions on Reddit, based on presumptions I posted in this Reddit comment - see the attached PDFs for details.
Briefly put, based on these calculations (PDF are shared publicly so that I can be easily corrected):
Front hub:
Even lengths: 196 mm (left); 198 mm (right)
Odd lengths: 195 mm (left); 197 mm (right)
Rear hub:
Even lengths: 198 mm (left); 196 mm (right)
Odd lengths: 197 mm (left); 195 mm (right)
That is for 2mm thick spokes, 12 mm long (brass) nipples, and assuming the ERD is measured correctly - laced 3 across, with 32 spokes.
Re-posting the given dimensions.
Note that the "spoke hole diameter" in the pic probably refers to the rim, not the hub.
Also, note that the hub flanges are 3 mm thick, so I added half of that (1.5 mm) when "measuring" the flange offset from the hub's lateral centre line.
And yes, I'm too old to figure out how to post a PDF on Reddit.
So, here are my calculations for these hub dimensions on Reddit, based on presumptions I posted in this Reddit comment - see the attached PDFs for details.
Briefly put, based on these calculations (PDF are shared publicly so that I can be easily corrected):
Front hub:
Even lengths: 196 mm (left); 198 mm (right)
Odd lengths: 195 mm (left); 197 mm (right)
Rear hub:
Even lengths: 198 mm (left); 196 mm (right)
Odd lengths: 197 mm (left); 195 mm (right)
That is for 2mm thick spokes, 12 mm long (brass) nipples, and assuming the ERD is measured correctly - laced 3 across, with 32 spokes.
Re-posting the given dimensions.
Note that the "spoke hole diameter" in the pic probably refers to the rim, not the hub.
Also, note that the hub flanges are 3 mm thick, so I added half of that (1.5 mm) when "measuring" the flange offset from the hub's lateral centre line.