b-shifters-derailleurs-index

Poštovani Sa kojom pastom da podmažem SRAM GRIPSHIFT MRX i gde može da se kupi u Srbiji? S poštovanjem, Stanko.

Hi, I recently fixed my Shimano GRX 810 right lever, that stopped shifting up. I bought it new and had it for about two years. Here's detailed pictures. There is a tiny spring that slips from the hammer piece that engaging the cogwheel. In order to put spring piece (nr 2) on top of that hammer...

I currently have a shimano 11 speed rear derailleur, shifter and cassete (group deore 5100). However, I am planning to switch to a 12 speed cassete compatible with HG free hubs (shimano does not make those but other manufactures do). From research I have done, the rear derailleur of shimano 11...

That's great, i will try to use my stihl chainsaw oil +10% of diesel. Just watched your video with basic maintenace procedure. I have done my rear derailleur maintenance recently by following this shimano manual (attached). There was quite enough factory lube inside though, lube was even clean...

Hello, I have Sram Empire 11 speed road brifters with Sensah Empire rear derailleur which shifts ok except when going to 10th and 11th cog on the rear. The rear derailleur is exact copy of Sram Red, Force and Rival derailleurs (I believe they call it Exact Actuation). I know that Sensah offers...

Hi Everyone, thank you for welcoming me to this forum. I have an old Giant TCR equipped with a Shimano 105-5700 Groupset. Since I am passing the bike on to my father, he'd need a reduced gear ratio. Are the FD-5700 derailleur and the BB71 41B bottom bracket that I currently have compatible with...

Dear bike fans, Very soon I'm having a new Reynolds 853 frame made by Mercian (UK) and if possible I would like to avoid adding brazed mounting points for everything (shifters, brake cables and even bottle cages) and keep the tubes total clean. Does someone know where it's possible (or if it's...

Hi everyone, I bought a used bike in a v. good condition (I know the seller who's has a bit more knowledge about bikes than I have but he preferred to use local bike shops if you know what I mean) ) with a broken front derailleur Tiagra FD-4503. Would you be kind enough to recommend a FD...

Hi Relja, I have some doubts about the compatibility of the Dura Ace 10V bar ends with the front derailleur for a double GRX crankset. 46-30. can I mount an FD-RX400? the idea is this: - SL-BS79 Bar End 2/3x10 - RD-M592 9v SGS - CS-HG500-10 - HG-X 10 / HG-10 it would be all new material, I only...

Hi, I am running a 46/30 10 speed setup. My shifters are 10 speed 105s. My problem is that the standard 5700 front derailleur hits the chainstay when the chain is on the inner ring. Off course i can move the FD higher, but that leads to shifting problems 'cause the FD is too high. do you...